How to handle the slitting machine rewinding faults and power failure analysis?

Time:

Aug 16,2023

To have a targeted understanding of the various aspects of drilling machines and to pay attention to more practical situations, you can avoid entering these misunderstandings, and naturally, you can buy better quality drilling machine products, which will provide sufficient assurance for the future. Therefore, we should actively consider these aspects.Slitting MachineCan the manufacturer help us understand how to handle slitting machine rewinding faults and analyze power supply faults?
During the operation of the slitting machine, if a rewinding fault occurs, we can consider the following three aspects to troubleshoot the fault:
1. When the unwinding machine is running the product, check if the tension of the winding shaft is too tight, or if it is closely related to the glue during gluing;
2. If the semi-finished product wrinkles during the winding of the slitting machine, the pressure of the tension cylinder can be appropriately increased;
3. When the center of the semi-finished product is loose, it is closely related to the uneven glue on the dispersing machine and the uneven substrate. The bow roller should be adjusted to support it evenly, or the tension of the roll should be increased, and the substrate should be compacted with the knife tube.
However, if during normal operation, it is not due to mechanical operation and handling issues, but rather when the processing plant suddenly experiences a power outage, how should it be handled?
1. Timely cut off the power switch to prevent sudden power restoration and unnecessary damage.
2. Immediately arrange the paper in the paper separator, as the sudden power cut may leave some residual paper in the machine, preventing residual paper from remaining in the paper separator and affecting future production.

Slitting Machine