How is a slitting machine set up and controlled?

Time:

Mar 29,2023

Slitting MachineIt is usually used in the paper industry, as well as in the mica tape, printing, and packaging industries. However, people are not very clear about the startup and design control of the slitting machine. This operation is usually part of the normal operation of the slitting machine. From the manufacturer of Zhongchuang slitting machines, how to set up and control the slitting machine?

Set up and control the slitting machine by configuring the slitting menu according to the types of films, thickness, length, width, etc., arranged in the slitting plan. Extract the corresponding BOPP film files from the PDF. Select the appropriate winding station, adjust the pressure roller arm and pressure roller of the slitting machine, install the paper core of the corresponding specifications, and set the winding length and width of the film according to the specifications.

Turn on the power switch of the hydraulic system of the slitting machine (located on the main hydraulic drive frame), check whether the oil level and pressure gauge display of the main hydraulic drive system are correct and stable, open the pneumatic shut-off valve (located on the intake pipe under the pneumatic control cabinet), and check whether the air pressure of the slitting machine is correct (not lower than 6.0 bar) and stable.

When we are all operating the slitting machine, we can stop the operation according to the startup and setting control methods of the slitting machine. What we need is the correct method to operate and use the slitting machine. The slitting machine is used to guide equipment operators in the correct operation and use of the equipment.