How to solve problems when the film slitting machine is not working properly?

Time:

Aug 31,2021

Slitting MachineCommonly used in papermaking machinery, wire and cable mica tape, and printing and packaging machinery. When the slitting machine cuts the paper, it will show that the paper is not blocked. We should not be nervous. We carefully observe the problem and find the corresponding solution to solve it. Then we know that the slitting machine is not cutting the paper properly. How do we solve these problems?
1. The lower roller of the slitting machine is connected to two paper rollers, and the paper not being cut is a common minor issue. If this problem occurs, first check whether the blade of the paper cutter is intact. If it is intact, after installing the paper cutter, check whether the paper cutter is connected to the bottom knife.
2. When the slitting machine is not in place during the lifting process, first check whether the external limit is normal, and then check whether the paper cutter's gearbox is not lifting enough due to low oil level. Check whether the three-row chain of the paper cutter is too long.
3. When the slitting machine's paper cutting knife rolls manually with significant bouncing, remove the paper cutting knife head and replace it with a round knife shaft.
4. When lifting the paper cutter and fixing the knife holder on the roller, first check whether the cylinders on both sides of the paper cutter are working normally during the lifting process. If one cylinder does not move, the knife holder will connect to the surface of the roller. At this time, the cylinder needs to be replaced.
The abnormal operation of the slitting machine is mainly described above. The abnormal operation of the slitting machine is mainly described above. The abnormal operation of the slitting machine is mainly reflected in the above places. We all need to solve the above problems.