What is a pelletizing film recycling machine?

Time:

May 14,2021

High efficiency recycling, high efficiency returns, ChinaCold granulation film recycling machineFounder
Utility model patent number: ZL 2004 3 0043366.9
Appearance patent number: ZL 2004 3 0037571.X

chanp

Main use:
Suitable for the granulation processing of waste, defective products, and edge materials of films such as CPE, PE, CPP, PO, PP, EVA, BOPA, POF, LLDPE, TPU, and PVC non-woven fabrics, and can be used in high proportions with raw materials.
Advantages:
Cold cutting granulation, no heating required, no dust, very low noise, does not change the chemical composition and plasticizing performance of the material. Low power consumption, power 5.5KW-11KW, the density of the processed granules is similar to that of the original granules, can be evenly mixed with raw materials, does not block the feeding port, and is not prone to crystal points, with an addition amount of up to 30%-40%. Can be linked with production lines and slitting machines or operated by dedicated personnel.
Working principle:
The edge material of the film enters the pressing device through the feeding mechanism, is compacted, and then transmitted to the cutting component, where it is cut into sheet-like granules.

N. Serial number	Item 项目	H981-B	H981-C
1	Power Total power (kw)	5.5	7.5
2	Maximal producing material 产量	≈100～150kg/h	≈180～250kg/h
4	SizeExternal dimensions (L×W×H)(mm)	1050×630×1930	1250×630×2130

Comparison table with current machines on the market

Model	H981Granulator	Plastic crusher	Plastic recycling machine
Plastic recycling method	Directly compressing and cutting plastic granules	Direct mechanical crushing	Heating plastic for extrusion by plastic extruder
Product shape	Granular	Sheet or powder	Granular
Plasticizing performance	Consistent with original film	Consistent with original film	Worse than original film
Maximum addition amount	Because the granular density is similar to plastic, it can be added.30%-40%	Due to the lower density than plastic granules, it easily floats at the top of the feeding hopper, causing blockage at the discharge port and uneven plastic extrusion, can only add.5%-10%	Due to the decline in plasticizing performance, can add.10%-15%And the product has crystal points.
Usage method	Can be linked with film production lines and slitting machines, or operated by dedicated personnel, with a high degree of automation.	Requires dedicated personnel to operate, low degree of automation, cannot be linked with production lines.	Requires more than two people to operate, complex process cannot be linked with production lines.
Power consumption	5.5kw~11kw	7kw	40kwAbove
Workload	100~250kg/h	180~250kg/h	80~250kg/h
Product cleanliness	Direct granulation linked with production line, not affected by environmental pollution.	May be affected by environmental pollution.	Due to the complexity of the process, the opportunity for environmental pollution is the highest.

Comparison~~table~~with other recycle machines in market

Type	H981-recycling machine	Plastics cracking machine	Plastic recycling machine
Recycle mode	Cutting and shaped (non-heated)	Crashing	Heating up and shaped
Product shape	Slice granule	Slice powder	Granule
Chemistry performance	Identical with original	Identical	No identical
Maximal accession amount	30%-40%	5%-10%	10%-15%
Operating mode	Single, online	Single, no online	Complex, no online
General power	5.5kw~11kw	7kw	40kw
Machining amount	100~250kg/h	180~250kg/h	80~250kg/h