What is the specific process for installing a slitting machine?
Time:
May 10,2023
When the machine is assembled and the slitter is not installed at the beginning, the components are usually separated. After selecting the site, place the front and rear middle frames on a level surface to maintain a uniform level line, ensuring stable operation. Can the manufacturer of the Zhongchuang slitter take us through theSlitterspecific installation process?
After all parts of the cutter are installed, connect the power supply for testing. During the testing process of the cutter, materials do not need to be installed for testing. Then, observe the working conditions of each component of the cutter. If any abnormalities are found, the power supply of the cutter should be turned off immediately.
When the cutter is not running, it is necessary to disconnect the power supply for safety reasons. After installation, conduct a pre-operation inspection and treatment of each component of the slitter, including chains, sprockets, bearings, and reducers, and add lubricating oil or grease. After lubrication, debug the main components to ensure smooth rotation without any blockage.
The site for installing the slitter must be on a relatively flat and hardened surface, as the slitter requires a good operating environment. If the ground is uneven, the coordination between components during operation will be uncoordinated, leading to unqualified products.
Related News
Contact Us
Here is the title one h1 placeholder text
FOSHAN HONGFENG MACHINERY CO., LTD
Marketing Department
+86757-81802801
Business one
Business II
Business three
+86757-81802805
Business four
Business Five
+86757-81802810
Fax: 0757-81802811/81802800
E-mail:sale@fs-hf.com/tongfu@163.com
mechanical after sales service:+86757-81802803 +8618929916332
Electrical after-sales service:+86757-81802809 +8613902843064
Page address: http:/www.fs-hf.com
OUR PRODUCTS
Welcome to know our products
Powered by：CEglobal | Business License
SAF Coolest v1.3.1.2 设置面板 GAGSD-ZGYF-JASVE-ZDA
无数据提示
Sorry, the current column is being updated, please look forward to it!
You can view other columns or returnHome Page